| Machining Capabilities | ||||
| Milling Machines and Machining Centers | ||||
| HAAS Horizontal Machine Center | HS-2RP : 2 each : Cat 40 taper tooling : 40 tool carousel : Envelope 38" x 35" x 31" | |||
These
are 4 axis machines with 2 pallets each capable of a 1200# work
load. They are connected to dedicated
PCs with printers and can print out serialized
inspection reports for each part they make. |
||||
| HAAS Vertical Machine Center | VF-5 : 2 each : Cat 50 taper tooling : 30 tool carousel : Envelope 50" x 26" x 25" | |||
| These are 3 axis machines with
a 4th axis rotary table available. They can handle a 4000# workpiece. |
||||
| HAAS Vertical Machine Center | VF-4 : 2 each : Cat 40 taper tooling : 24 tool carousel : Envelope 50" x 20" x 25" | |||
| These are 3 axis machines with
a 4th axis rotary table available. They can handle a 3500# workpiece. |
||||
| HAAS Vertical Machine Center | VF-2 : 3 each : Cat 40 taper tooling : 20 tool carousel : Envelope 30" x 16" x 20" | |||
| These are 3 axis machines with
a 4th axis rotary table available. They can handle a 3000# workpiece. |
||||
| HAAS Tool Room Mill | 2 each : Cat 40 taper tooling : 10 tool carousel : Envelope 30" x 12" x 16" | |||
| These are 3 axis machines with
a 4th axis rotary table available. They can handle a 1000# workpiece. |
||||
| HAAS Mini Mill | 1 each : Cat 40 taper tooling : 10 tool carousel : Envelope 16" x 12" x 10" | |||
| This is a 3 axis machines with
a 4th axis rotary table available. It can handle a 500# workpiece. |
||||
| Chevalier CNC Knee Mill | 1 each : NMTB 30 Tooling: Manual tool change: Envelope 30" x 13" x 16" | |||
| This is a 2 axis CNC-controlled mill with a manual Z-axis. | ||||
| CNC and Manual Lathes | ||||
| All manual lathes are equipped with Sony Digital Readouts for high accuracy and repeatability. Aloris tool posts and blocks are used on all manual lathes as well. These provide the repeatability, rigidity, and rapid setup needed to assure high metal removal rates, close tolerances, and good finishes, as well as quick job setup and turnaround. | ||||
| HAAS SL-30 Big Bore | CNC : I each : 4.062" spindle bore :30 hp : 12 tool turret : 14" swing : 34" between centers | |||
| HAAS SL-30 Standard | CNC : 4 each : 3.00" spindle bore :30 hp : 12 tool turret : 14" swing : 34" between centers | |||
| HAAS SL-20 Standard | CNC : I each : 2.00" spindle bore :20 hp : 10 tool turret : 10" swing : 20" between centers | |||
| ` | HAAS Mini Lathe | CNC : 1 each : 5C collet : 7.5 hp : gang tooling : 6000 rpm | ||
| Lodge & Shipley | Manual : 1 each : 8.88" spindle bore : 40 hp : Standard tooling : 25" swing : 160" between centers | |||
| Kingston | Manual :1 each : 4.06" spindle bore : 25 hp : Standard tooling : 26" swing : 60" between centers | |||
| Kingston | Manual :1 each : 3.00" spindle bore : 10 hp : Standard tooling : 17" swing : 43" between centers | |||
| Clausing | Manual :2 each : 2.06" spindle bore : 7.5 hp : Standard tooling : 15" swing : 40" between centers | |||
| Fabrication Equipment | ||||
| DoAll Automatic Saws | 2 each : Programmable automatic stock feeder : 11" round capacity | |||
| Miller MIG Welder | 1 each : 250 amp : 100% duty cycle : Multi-material memory for rapid setup | |||
| Miller TIG welder | 3 each : 350 amp : programmable waveform : Multi-material memory for rapid setup | |||
| Glenn Stick Welder | 1 each : 300 amp DC | |||
